Compare cabinet materials, finishes and layouts for your home, villa or apartment project. Share your plans and preferred style to discuss design options and a quotation with George Group.
Start with your layout, how the kitchen will be used and the finish you want. Then confirm the cabinet construction, fittings and delivery scope together. For several kitchens, include the unit types, quantities and delivery stages.
A finish name does not describe the whole cabinet. Compare the layers below when shortlisting products or checking two quotations.
| Decision | What to compare | What to confirm |
|---|---|---|
| Cabinet body | The material and construction behind the doors | Board or metal specification, thickness, edges, back panels and requirements for the intended environment |
| Doors & surface | Solid wood options, door profiles, lacquer, acrylic, PVC and other available finishes | The underlying material, finish sample, colour reference, gloss level and care instructions |
| Hardware & storage | Hinges, drawer runners, handles, shelves and internal accessories | Selected brand/model where specified, included quantities, clearances and accessory list |
| Layout & dimensions | L-shaped, U-shaped, galley, single-wall and island arrangements | Site measurements, opening clearances, plumbing points and appliance interfaces |
| Worktops & finishing pieces | Worktops, sinks, fillers, end panels and plinths | Included items, cut-outs, joints, installation responsibility and any exclusions |
Available specifications vary by range. Confirm the selected configuration and relevant technical documents before ordering. Explore cabinet types or compare high-gloss kitchen ideas for more detail.
Explore the existing collections below. Materials and finishes describe different parts of a cabinet: use the comparison guide above to decide which construction, surface and fittings to confirm for your project.
George Group has 40,000 m² of total showroom space in Foshan with the whole category of products, including :
The video shows an earlier showroom tour. The current 40,000 m² figure refers to George Group’s total showroom space in Foshan across product categories.
Compare shaker, flat-panel, glass-front and other available door styles. Confirm the profile, handles, visible end panels and finishing details together. Use reference photos to communicate the look you want.
Choose a colour direction, then review a physical finish sample where available. Agree the colour reference and how doors, visible panels and worktops will coordinate. Screen images alone cannot establish an exact colour match.
Explore U-shaped, L-shaped, galley, island and single-wall layouts. Share room dimensions, door and window positions, plumbing points and appliance information so the team can review clearances and interfaces.
Compare the cabinet body, door material and surface finish separately. Discuss your appearance, maintenance and budget priorities, then record the selected construction and hardware in the quotation. See the material and specification comparison.
A kitchen price depends on its layout, construction, finishes, fittings and delivery scope. Send the information you have; identify anything still undecided so the quotation can state its assumptions clearly.
Planning without final drawings? Describe your project and the details still to be confirmed. Our team can discuss the next steps and how to share plans or reference images. The initial enquiry form accepts your contact details and a message.
Send your project country, kitchen quantity, preferred style and the drawings or dimensions you already have. Identify any details still being decided. Start with the quotation checklist.
Review our measurement service and agree who confirms final site dimensions.
Agree the design-service scope and any charges. Review layouts, appliance openings, material and colour references, hardware and included items. Keep the approved drawing version with your order documents.
Explore our design and material selection support.
Confirm the specification, quotation, payment terms, production schedule and required checks before ordering. If an approved detail changes, agree the revised scope, cost and timing in writing.
Confirm packing, delivery destination and shipping scope before dispatch. Agree customs-clearance, local delivery and installation responsibilities, together with the drawings or guidance your installer needs.
Use the approved drawings, material references and item list as the basis for quality checks. Discuss which records are available for dimensions, finish, hardware, accessories and packing.
Read our quality overview.
Compare like-for-like specifications, including fittings, finishing pieces and delivery scope. Ask for optional items and exclusions to be listed clearly so you can judge the quotation against your project budget.
Discuss the size, layout, door style, colour, finish and storage options needed for your kitchen. Confirm feasibility and the selected details before production, including appliance and worktop interfaces.
George Group has a team of 2,000 people supporting building materials and project solutions. Discuss the design, product selection and coordination support needed for your kitchen and wider project.
Requirements vary by material, product and destination. Request the relevant documents for your selected configuration, and check the covered product, issuing body and validity. Confirm any project-specific requirements before ordering.
Discuss the production arrangements and checks for your selected range. Confirm order-specific timing, packing, installation information, warranty coverage and replacement-part arrangements in the agreed order terms.
Explore design discussions, measurement guidance and production videos. These introductions help you prepare questions; the approved specification and order documents define your own cabinet package.
Practical answers about selecting, specifying and ordering cabinets for an overseas project.
Share your project country, number of kitchens, layout or drawings, key dimensions and preferred style. Include appliance details, material or finish preferences and the items you want supplied. If some details are undecided, identify them so the quotation can explain its assumptions and exclusions.
Yes. Start with the information you have, such as a room sketch, approximate layout or reference images. Discuss the next steps with the team. Final site dimensions, appliance interfaces and approved production drawings need to be confirmed before an order moves into production.
The cabinet body, door construction, surface finish, hinges, drawer runners and internal accessories all contribute to the specification. Layout complexity, finishing pieces and delivery scope also matter. Compare an itemised quotation for the same configuration instead of comparing a finish name or a single headline price.
Tell the team about the intended environment and how the kitchen will be used. Ask for the selected material, edge treatment, hardware and care requirements to be confirmed. A material label alone does not establish moisture performance; review the exact product information and address ventilation and plumbing with your local project team.
Discuss the room layout, storage needs and appliance models with the team. Confirm door and drawer clearances, appliance openings, service access and worktop interfaces on the drawings. Feasibility depends on the selected construction, dimensions and accessories.
Design support can be discussed as part of your project. Confirm the deliverables, any fees, revision scope and approval process before work begins. The design-service scope should be recorded separately from assumptions about what is included in the cabinet price.
Send the kitchen quantity, unit types and preferred specification so the team can check the order conditions. Minimum quantities and production arrangements vary by selected range and project. For multiple units, confirm sample approval, repeatable specifications and delivery stages.
Check the item list. Confirm whether worktops, sinks, taps, appliances, hinges, drawer runners, handles and storage accessories are included or quoted separately. Record the required models, quantities and cut-outs so interfaces can be checked before production.
Use reference images to shortlist a direction, then discuss sample availability and any sample or shipping charges. Agree the selected material, finish and colour reference in writing. Screens, lighting and natural material variation can affect appearance, so clarify what the approved sample represents.
Ask for a schedule for your approved specification, quantity and destination. Separate design and approval time, production time, freight transit and local clearance or delivery. Changes after approval can affect cost and timing, so confirm revisions with the team.
Agree the checks and packing arrangements for your order, including drawings, dimensions, finish, fittings, accessories and item identification. Confirm the assembly format and any installation information your local installer needs. On arrival, keep photographs and packing records if an issue requires review under the agreed delivery terms.
Confirm installation responsibilities before ordering, including who checks site conditions and who coordinates the local installer. Agree the drawings or guidance provided, warranty coverage, exclusions and replacement-part process in the order terms. Do not assume installation or every site service is included in a product quotation.
We can help. Our team specializes in crafting luxurious and innovative homes that will exceed your expectations.
Download our Investment Guide to learn about what makes our design process perfect for your dream house.
EN 
AR 
DE 
ES 
FR 
ID 
RU 
PT 
ES_DO 
PT_AO